MSF Brand Plywood Shuttering Plates are manufactured from high densified film faced shuttering ply encased in rigid steel frame for protection against wear and tear and water The outer frame comprises of 63 * 5/6 MM flat, and internal grid of 50 * 5 MM flat forming grid of 300 * 300 MM or 300 * 450 MM. The stiffner flat are of one piece giving a solid strength. High Densified Ply is firmly riveted to steel frame by 23 numbers high class aluminium steel composite rivets with auto riveting machine & sealed by silicon sealant. Since these plates are incased in steel frames, it gives 100 to 110 repetition from 1 side to 50 to 60 repetition from other side. Plywood shuttering plates specially designed for P.T. slabs, for building, bridges, heavy industries, power plants. MSF Brand High Densify ply shuttering is light in weight sturdy and having very smooth finish thus reducing the cost of plastering and giving dent free table top finish to the slab. Since these plates are manufactured in size of 600 * 1200 MM, 1200 * 1200 MM & 1200 * 2400 MM the cost of props & spans is reduced by 30 to 40%. MSF Brand High Densify ply shuttering plates are lighter in weight, with higher strength cost saving durable easy to carry from slab to slab. Being laser in cost than steel plates in slashes the initial investment cost, further after use of 110 to 120 times only by changing the plywood the plates becomes brand new plates. MSF Brand ply wood shuttering plates are in cased in steel frame and fixed by rivets, aves cost of timber also for labour at site cannot burn the shuttering plates. MSF Slab forming system has become safe and faster conception of slan forming methos in just with one system. The advantage of the system is that same components are used for different application in building industry.